2 Inch Split Ring Pump Union
|
Split ring union for most pump
threads.
Do you have a cracked 2 inch
union on the pump? Don't want to replace all the plumbing glued
to it? Try this split ring union. Designed to replace broken
or cracked unions on the intake or discharge of a pump.
$8.36
|
2 Inch Pump Union
|
Female pump union for most pump
threads.
|
Slip/Slip
|
Slip/Spig
|
Spig/Spig
| Gate/Slice Valves
|
Magic plastic slice/gate valve,
sealed, uni-body construction. Choice of 2 sizes and 3 types:
- Slip/Slip: PVC pipe slips into
each side of the valve
- Slip/Spig: PVC pipe slips into
one side, fitting slides over other side
- Spig/Spig: Fittings slide over
both sides of the valve
|
90 Degree Slip/Slip
|
Schedule 40 PVC 90 degree elbow
|
90 Degree Slip/Spig
|
Schedule 40 PVC 90 degree elbow
|
90 Degree Sweep Slip/Spig
|
Schedule 40 PVC 90 degree sweep
elbow
|
45 Degree Slip/Slip
|
Schedule 40 PVC 45 degree elbow
|
45 Degree Slip/Spig
|
Schedule 40 PVC 45 degree elbow
|
Coupler
|
Schedule 40 PVC coupler
|
Tee
|
Schedule 40 PVC tee
|
Reduced Side Tee
|
Schedule 40 PVC reduced tee
|
Reducer
|
Schedule 40 PVC reducer
|
Large 2 inch 3 Way Diverter Valve
|
Large, 2 inch 3 way diverter
valve. This large diverter valve is most commonly used on spas
to divert water from one side to the other.
Valve comes complete with:
- 2 Inch PVC Diverter Valve Body
- Piston
- Retaining Cap (Gray Color)
- Handle (Gray Color)
- Spa Bushing and Nut
- O-rings, 2 Small for Piston
and 1 Large for Cap
$29.99
|
1 Inch On/Off Valve
|
1 inch on/off valve. This small
diverter valve is most commonly used on spas to turn on/off neck
jets or waterfalls.
Valve comes complete with:
- 1 Inch PVC Valve Body
- On/Off Top Cap (Gray Color)
- Retaining Cap (Black Color)
with attached Piston
- Spa Bushing and Nut
- O-rings, 2 Small for Piston
and 1 Large for Cap
$19.99
|
1 Inch Diverter Valve
|
1 inch diverter valve. This small
diverter valve is most commonly used on spas to turn on/off neck
jets or waterfalls.
Valve comes complete with:
- 1 Inch PVC Diverter Valve Body
- Piston
- Retaining Cap (Gray Color)
- Handle (Gray Color)
- Spa Bushing and Nut
- O-rings, 2 Small for Piston
and 1 Large for Cap
$14.99
|
Mazzei® Injector
|
Each injector comes with 2 hose
clamps. The injector is 3/4 inch barbed x 1/4 inch barbed fittings.
Special Features:
- Considerable cost savings versus
other injection methods
- Single unit construction-Trouble
free operation with no moving parts
- No electrical connections needed
- Can run dry with no problems
- Molded of: Polypropylene; PVDF
(KYNAR); 316 L Stainless Steel
- Proven Performance
How an Injector works:
When a pressurized operating (motive) fluid enters the injector
inlet, it is constricted toward the injection chamber and changes
into a high velocity jet stream. The increase in velocity through
the injection chamber results in a decrease in pressure, thereby
enabling an additive material to be drawn through the suction
port and entrained into the motive stream. As the jet stream
is diffused toward the injector outlet its velocity is reduced
and it is reconverted into pressure energy (but at a pressure
lower than injector inlet pressure). Mazzei® Injectors are
extremely efficient. They operate over a wide range of pressures
and require only a minimal pressure differential between inlet
and outlet sides to initiate a vacuum at the suction for either
liquid or gas.
$27.95
|
PVC Flex Hose (Schedule 40)
|
PVC flex hose (schedule 40) in
a variety of sizes, 1/2 inch through 2 inch diameter.
Price's are per foot.
We can ship hose precut or up to a 50 foot roll.
|